This page is Weesepu’s ring rail selection tool. Fill in the structural form, transmission mode, load, carrier plate size, work station layout and rhythm according to the actual working conditions. The system will provide the recommended guide rail model according to the built-in specification table, as well as key specifications such as arc diameter and straight rail length. The corresponding drawings can be downloaded directly.
!
DisclaimerThe auxiliary selection results are for reference only, and the accurate technical model must be finalized before confirming with our project and placing an order for production.
Step 1: Which category do you want to choose?The two types of processes are different, so decide on the major items first
Whole lineCircular conveyor line/assembly line
A complete circulation conveying system, from layout to key parameters of the line.
LayoutHorizontal / vertical; horizontal is divided into ellipse and rectangle
inputLoad, carrier plate size, work station spacing and quantity, step cutting time
outputRecommended type number, standard arc diameter, key parameters of wire body
Start whole line selection →
Rail componentsSingle segment guide rail/slider set
Only select the guide rail and slider itself, regardless of how the entire line is arranged.
ExpandContainsMagnetic levitation special guide rail(V30/V44/V50/V76, the straight rail length is given according to the drawing)
Start rail component selection →
1 direction/shape
2 Transmission·Structure
3 Fill in the load and dimensions
4 Confirm the model and cable parameters
5 Recommended results
Step 1: Whole line layout directionInfluence of gravity force and recommended parameters
horizontal lineThe linear body circulates in the horizontal plane, and the slider mainly bears lateral and inertial forces.
vertical lineThe wire body circulates in the vertical plane, and the slider needs to overcome gravity to lift the fixture, which will bear greater force.
Step 1.5: Horizontal Line ShapeAffects straight line segment segmentation (2 segments/4 segments), vertical lines do not need to be selected
oval track shape2 arc segments + 2 straight segments, the straight segment is longer, suitable for scenes with long lines and concentrated work stations.
rectangular rounded corner4 arc segments + 4 straight segments, four-corner turning, suitable for square or compact layout.
Step 2: Transmission method and line structureFirst determine the transmission and line structure, and then determine the guide rail model; both items will be written in the final specification and model number.
Drive
chainHigh speed/heavy load/oil resistance is preferred
timing beltClean / medical / food, no lubricating oil, no flakes
Magnetic levitation guide railRail componentsFor model selection (without chain/toothed belt, straight rail length is given according to the drawing), please go back to the "Guide Rail Components" entry in the previous step.
Big boardVertical line / Recommended when there is punching forceHeavy load/high speed, large overall plate, strong rigidity, large load-bearing capacity, and good vibration resistance
Transmission mode:—Line structure:—← Modify
Step 3: Load and Carrier Plate DimensionsFill in the "eccentric load distance → single slider load → carrier plate size" in order; the model is not determined in this step. After filling in, click "Next" to confirm the system recommended model on the next page.
Carrier board dimensions (length × width × height, mm)The width W determines the minimum arc diameter, and the three dimensions together with the load participate in the comprehensive determination of the model.
After filling in the "Load + Carrier Plate Size", click "Next" and confirm the system recommended guide rail model at the end of the next page (can be switched to alternative).
Step 4: Line Geometry and RhythmFill in the work station spacing / quantity / secondary positioning / beat / arc diameter in sequence; the system recommended guide rail model is placed at the end of this page, you can switch to alternatives
secondary positioningTo determine the stopping accuracy and fastest beat, the chain/synchronous belt line body must be confirmed.
There is a secondary positioningAfter stopping, the cylinder/connecting rod pin positioning mechanism locks the carrier plate before starting the operation.Repeatable positioning accuracy 0.03–0.05 mmThe positioning action takes up 0.4 s, and the moving segment is the fastest at 0.6 s.
No secondary positioningThe stop position depends on the transmission itself and does not have an independent positioning mechanism. The structure is simple and the cost is low.Repeat positioning accuracy ±0.5 mmEliminating positioning action, the fastest moving segment can be 0.5 s
takt timeTotal step cutting time = moving time + non-moving time (secondary positioning/dwelling); only moving time participates in speed calculation
Working conditionsThe punching force is divided into four categories according to the force position and direction; when there is punching force, the size of the punching force (kg) must be filled in, and a large plate structure is recommended. The work environment was determined in step 2
Stamping force (force position and direction)Dashed box = guide rail, light colored block = carrier plate, orange arrow = direction of punching force
No punching forcePure conveying/assembly, no stamping or pressing action
Center vertically up and downThe punch is in the center of the carrier plate and pressed from top to bottom.
Center vertically downward and upwardLift / lift in the center, from bottom to top
In the left guide railThe force is on the left side, pressing the inside of the guide rail
In the right guide railThe force is on the right side, pressing the inside of the guide rail
Working environment:OrdinaryTransmission mode:—Line structure:—← Modify
Line geometry (closed loop layout)
The length of the straight rail is back calculated by the formula:Straight rail length (one side) = ((number of work stations × work station spacing − number of driving gear teeth × tooth pitch) ÷ 2) + 2;Number of driving wheel teeth × tooth pitch. Please check the "Arc Teeth Number and Pitch Table" according to the selected model and arc diameter.
The transmission mode and line structure have been determined in "Step 2" and are no longer selected in this step. The arc diameter D is ranked at the last parameter: first, the minimum diameter is deduced from the speed, and then the larger value is taken with "D > carrier plate width".
System recommended guide rail modelJudge according to the filled load/eccentric load/carrier plate size, and you can switch to the alternative; if it is not suitable, please go back to step 3 to change the parameters.
After filling in the load of a single slider, the guide rail model is given here
Inappropriate model?← Go back to step 3 to modify the load/vehicle plate size
Recommended parameters for the entire line
—
Transmission mode and line structureDetermined in step 2
Selected drive:—← Modify
Product library matchingAccording to the model series (V rail / T rail) → structure (oval / rectangular / arc parts) → transmission mode, check the published plan page on the website; the arc diameter is individually judged as standard / non-standard
Details such as load/vehicle board/pace/arc/geometric calculation are not expanded on this page. Clicking the button below will bring these parameters to the technical confirmation at once.
1 Select structure and driver
2 Fill in the load
3 Fill in the size and beat
4 Recommended results
Step 1: In what structure are the rails used?Arc/ellipse requires arc diameter verification, rectangular/straight-line closed loop is not involved.
Arc/Ellipse Circular LineThe trajectory contains arc segments, and it is necessary to ensure that the standard arc diameter > carrier plate width
Rectangular/straight closed loopPure straight line segment splicing, no arc diameter constraints
Drive modeThe magnetic levitation special guide rail is only suitable for V30 / V44 / V50 / V76
chainHigh speed/heavy load/oil resistant
timing beltClean / Medical / Food
Magnetic levitation special guide railNon-contact direct drive, model limited to V30 / V44 / V50 / V76, the length of the straight rail is manually filled according to the drawing
Step 2: Unbalanced Loading and Single Slide Loading
Chain/timing belt:Moving time = total step time t(Guide rail components have independent caliber, no secondary positioning, and no 0.4 s non-moving segment),Line speed v = station spacing S ÷ t、Straight rail length (one side) = ((N × S − Number of driving gear teeth × pitch) ÷ 2) + 2. After filling in N, S, and t, click "Automatically generate LG" and write it below. The arc diameter is selected according to the calculated v; you can also manually specify LG without looking at the formula.
After filling in the load and carrier plate size, the guide rail model is given here.
The guide rail components do not include linear structures (they belong to the category of complete lines); the result is that only the guide rail component codes are output.
Recommended rail models
—
Product library matchingAccording to the model series → structure → transmission mode, check the published plan page on the website; the arc diameter is individually judged as standard/non-standard
Details such as load/vehicle plate/beat/arc are not expanded on this page. Clicking the button below will bring these parameters to the technical confirmation at once.