Choose language

EnglishEspañolDeutsch日本語한국어Tiếng ViệtไทยFrançaisItalianoPortuguêsРусский简体中文
Home > Company news > What are the key points in the design of circular guide rail conveyor lines?

What are the key points in the design of circular guide rail conveyor lines?

Company News·2024-11-23
In recent years, circular guide rails have gradually been recognized and widely used in the manufacturing industry, promoting the transformation and renewal of the entire industry. The annular guide rail conveyor line uses steel wire rope or glass fiber as the strong layer and is covered with an annular belt of polyurethane or neoprene. It combines the advantages of belt drive, chain drive and gear drive, and the transmission system
In recent years, circular guide rails have gradually been recognized and widely used in the manufacturing industry, promoting the transformation and renewal of the entire industry. The ring guide conveyor line uses steel wire or glass fiber as the strong layer and is covered with an endless belt of polyurethane or neoprene. It combines the advantages of belt drive, chain drive, and gear drive. Together with the transmission system, it can perform cyclic motion, reduce the flow rate between stations, shorten the production cycle, improve production efficiency, reduce personnel costs, and realize production automation. So what are the key points in the design of the ring guide conveyor line?
1. When choosing the diameter, choose an arc guide rail with an appropriate diameter.
When the low-noise conveyor line of annular guide rail conveyor line meets the requirements of use, the turning diameter of the annular guide rail is designed to be as large as possible to avoid using small-diameter arc guide rails. The smaller the diameter of the arc guide rail, the faster the turning speed of the annular guide rail conveyor line is, the greater the centrifugal force, and the more obvious the impact sound of the slide roller when cornering.
2. When choosing a positioning mechanism, choose electric push positioning or extend the positioning time.
To achieve precise positioning, the circular guide rail conveyor line requires the use of a secondary positioning mechanism. In order to reduce noise, the selection of the secondary positioning mechanism is also very important. If there are strict requirements on noise, electric push positioning is preferred. The positioning mechanism is driven by a dedicated electric servo. The noise is mainly caused by the slight noise of the servo motor operation, which can basically be ignored. If the noise of about 40 decibels is acceptable, you can choose a cylinder-type positioning mechanism, but the air pressure must be reduced and the working time of the positioning mechanism should be appropriately extended.
3. When choosing the transmission mode, synchronous belt transmission should be preferred.
The circular guide rail conveyor line uses synchronous belt transmission, and the noise is relatively smaller than that of chain transmission. But if the speed is not fast, the durability requirements are high or the load is high, you can choose a better quality chain drive, perform regular maintenance, and appropriately increase the lubricating grease of the chain. A high-quality chain will not produce much noise when running at low speed.
Need help with selection or technical advice?
Ring guide rails/arc guide rails/V-shaped guide rails and complete line solutions support non-standard customization.
Call +86 18912659251
Have a specific project to evaluate? Send us the production line rhythm and workpiece parameters, and we will provide you with a practical technical solution.
Get in touch
苏州威赛普精密机械有限公司 版权所有  | Su ICP No. 2021007187-2
Inquiry